对于运行OSPF协议的路由器来说,RouterID是路由器的唯一标识,所以协议规定：必须保证RouterID在如下范围之内唯一（）。You want to upgrade the Ezonexam LAN so that all ports operate in full duplex mode. Which
Which of the following are types of flow control? (Choose three)路由器的配置文件startup-config存放在()里Buffering#
Cut-through
Windowing#
Congestion avoidance#
Load balancingRAM
ROM
FLASH
NVRAM#解析：
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?在OSPF的DR/BDR选举过程中,在路由器有相同的接
Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseT cable can be before it has to be segmented or repeated?You have a class C network, and you need to
如果网络中的路由器都是cisco路由器,则优先选择哪一个路由协议（）There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are
EIGRP的管理距离（）The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?90
100
110#
120It designates VL
“ipaccess-group”命令在接口上缺省的应用方向是什么"（）。What kind of cable should be used to establish a trunked line between two Catalyst switches?in
具体取决于接口应用哪个访问控制列表
out#
无缺省值A
As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?配置路由器时,封装PPP协议的命令是：()TestKSwitch
