1. [单选题]The company is buying 50 identical computers to run Windows 2000 Server in these offices. These servers must be installed to the company's standard configuration. You create a setup information file (SIF) that specifies the company's standard configuration.You want to automate the installation process as much as possible in the least possible amount of time.
A. What should you do?
B. Use Makebt32.exe to create four installation startup disks and add the SIF to the first disk. Instruct an employee at each office to start the installation by using these disks.
C. Create an MS-DOS boot disk that contains CD ROM drivers and the SIF and that runs the Winnt/S: D:\i386 command. Instruct an employee at each office to start the installation by using this disk.
D. Create a floppy disk that contains only the SIF. Instruct an employee at each office to start the installation by using the Windows 2000 Server CD-ROM, with the floppy disk inserted.
E. Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server CD-ROM to the folder. Add the SIF to the folder. Copy the folder to a writable C Instruct an employee at each office to start the installation by using this C
2. [单选题]You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.
A. However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
B. You are unable to perform. the upgrade. What should you do to resolve the problem?
C. Convert the system partition to NTFS.
D. Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
E. Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
F. Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
3. [单选题]You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.You want to upgrade your computer to Windows 2000 Professional.
A. What should you do?
B. Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
C. Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.
D. Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
E. Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
