1. [单选题]You are the administrator of Ezonexam.com's network.You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:
A. "Specified Port cannot be added. The port already exists."
B. You want to be able to use the new TCP/IP printer.
C. What should you do?
D. Modify the properties of the existing printer port to use the new print device.
E. Change the LPT port setting to bidirectional in the BIOS on your computer.
F. Change the LPT port setting to enable legacy Plug and Play detection on your computer.
G. Obtain and install the WDM-compliant device drivers and printing software for the printer.
2. [单选题]You want to upgrade 150 computers from Windows NT Workstation 4.0 to Windows 2000 Professional.You create an Unattend.txt file by using Setup Manager. You copy the file to a floppy disk.
A. You then start the installation on a test computer by using the Windows 2000 Professional CD-ROM.
B. You insert the floppy disk after the computer starts.
C. Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input.
D. What should you do?
E. Add a [Data] section to Unattend.txt, and set the Unattendedinstall parameter to Yes.
F. Add an [Unattend] section to Unattend.txt, and set the OEMPreinstall parameter to yes.
G. Rename Unattend.txt on the floppy disk to Winnt.sif.
H. Create a \$Oem$\$1 folder on the hard disk of the test computer, and copy Unattend.txt to the folder.
3. [单选题]You want to install Windows 2000 Professional on 30 PXE-compliant computers and 35 non-PXE-compliant computers. All 65 computers are included on the current hardware compatibility list (HCL). You create a RIS image. You load the image on the RIS server. You then start the 65 computers.You find that the 30 PXE-Compliant computers can connect to the RIS server.
A. However, the 35 non-PXE-compliant computers fail to connect to the RIS server. What should you do?
B. Run Rbfg.exe to create a Non-PXE-compliant startup disk.
C. Run Riprep.exe to create a Non-PXE complaint startup disk.
D. Grant the Everyone group NTFS Read permission for the RIS image.
E. Grant the Administrators group NTFS Read permission for the RIS image.
4. [多选题]You are the network administrator for Ezonexam.You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You need to install a custom application as part of the upgrade.
A. You need to include the commands necessary so that the custom application is installed as part of the upgrade process.
B. What should you do? (Each correct answer presents part of the solution. Choose two)
C. Create a command file named Unattend.txt to install the application.
D. Create a command file named Cmdlines.txt to install the application.
E. Copy the command file to the \$OEM\$C\ subfolder under the i386 folder.
F. Copy the command file to the subfolder named \$OEM$ under the i386 folder.
G. Copy the command file to the subfolder named \$OEM$\textmode under the i386 folder.
5. [单选题]You are the database administrator for an accounting company. You are installing SQL Server 2000 on a new Microsoft Windows 2000 Server computer. The computer will run two client/server database applications that your company has purchased. Each application uses a separate database.During the installation, you specify SQL_Latin1_General_CP1_CI_AI as the default collation for the SQL server computer. After completing the installation, you discover that one of the new applications, named Financials, is sorting information incorrectly.
A. You contact the application vendor and discover that the Financials application requires the SQL_Latin1_CP437_BIN collation. You need to configure the correct collation for the applications without diminishing the performance of the SQL Server computer.
B. What should you do?
C. Rerun the SQL Server Setup and specify the SQL_Latin1_General_CP437_BIN collation.
D. Run the rebuildm utility and specify the SQL_Latin1_General_CP437_BIN collation.
E. Use the ALTER DATABASE statement to specify the SQL_Latin1_General_CP437_BIN collation for the Financials database.
F. Use the ALTER TABLE statement to specify the SQL_Latin1_General_CP437_BIN collation for each table in the Financials database.
6. [多选题]You want to upgrade a Windows NT Server 4.0 computer named Server34 to Windows 2000 Server. Server34 is a member server in a Windows 2000 domain named marketing.fabrikam.local. The domain runs in native mode.You want to change the role of Server34 from a member server to a domain controller in the same domain. What should you do? (Choose Two)
A. Reinstall Windows NT Server 4.0 on Server34 in the same WINNT folder, and make Server34 a B
B. D
C. in the marketing domain.
D. Use Server Manager on Server34 and promote Server34 to a PDC for the marketing domain.
7. [单选题]You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".
A. You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?
B. Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
C. Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.
D. Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
E. Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
8. [单选题]You are the administrator of a Windows 2000 Professional computer that has a shared printer. Several departments in your company use the shared printer.The Sales department frequently prints multiple-page presentation graphics, which take a long time to print. Users in other departments who have short messages to print must wait an unnecessarily long time for their jobs to print.
A. You want to improve the efficiency of printing for all users who use the shared printer. You want to accomplish this with the least amount of administrative effort.
B. What should you do?
C. Configure the priority of the printer to 50. Add a new printer, and set the priority to 1. For the new printer, deny print permission for users in the Sales department.
D. Configure the priority of the printer to 50. Add a new printer, and set the priority to 99. For the new printer, deny print permissions for users in the Sales department.
E. Monitor the print queue and raise the priority of all print jobs that are sent by users who are not members of the Sales department.
F. Delete the old printer. Add a new printer, and set the priority to a higher value. Pause the print queue only when graphic intensive print jobs are printing.
9. [单选题]Ezonexam.com's network contains two domain controllers and approximately 500 client computers. The domain controllers run Windows 2000 Server. The client computers run Windows 2000 Professional. The majority of users have mobile computers. Users in Ezonexam often travel with their mobile computer for extended periods of time and do not have remote access to Ezonexam.com's network.You want to configure the domain controllers so that DNS only contains entries for computers that are active on the network. You also want to ensure that when users return you do not have to manually create or delete DNS entries.
A. How should you configure the DNS servers?
B. Configure both domain controllers with Active Directory integrated primary zones for the domain and enable secure dynamic updates for the zone.
C. Configure both domain controllers with Active Directory integrated primary zones for the domain and the secure cache against pollution option for the zone.
D. Configure both domain controllers with Active Directory integrated primary zones for the domain and enable scavenging and dynamic updates for the zone.
E. Configure both domain controllers with standard primary zones for the domain and enable scavenging for the zone.
F. Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone.
10. [单选题]You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.
A. You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.
B. You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?
C. Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.
D. Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.
E. Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.
F. Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
