1. [单选题]哪个命令可以成功测试网络：()
A. Router>ping192.5.5.0
B. Routerping192.5.5.30
C. Router>ping192.5.5.256
D. Routerping192.5.5.255
2. [单选题]路由器上“水平分割”的功能是：()
A. 分离端口
B. 阻止路由环路
C. 简化配置
D. 方便故障处理
3. [单选题]You have a class C network, and you need to design it for 5 usable subnets with each subnet handling a minimum of 18 hosts each. Which of the following network masks should you use?
A. 225.225.224.0.
B. 225.225.240.0.
C. 225.225.255.0.
D. 255.255.255.224
E. 225.225.255.240
4. [单选题]PPP工作在OSI的哪一层（）
A. 物理层
B. 数据链路层(data link layer)
C. 网络层
D. 传输层
5. [单选题]OSI七层模型中，网络层的数据封装名称为（）
A. 比特
B. 帧
C. 包
D. 段
6. [单选题]路由器的配置文件startup-config存放在()里
A. RAM
B. ROM
C. FLASH
D. NVRAM
7. [单选题]查看路由表的命令是：()
A. show interface
B. show run
C. show ip route
D. show table
8. [单选题]During the boot sequence, a Ezonexam 2800 series router needs to locate and load an operating system. What is the default order the router uses to find an operating system?
A. ROM, TFTP server, Flash
B. Flash, TFTP server, ROM
C. Flash, NVRAM, TFTP server
D. Flash, ROM, TFTP server
E. Flash, TFTP server, RAM
9. [单选题]After working all night and successfully configuring a Cisco router for the Ezonexam network you save your changes on the startup config, reboot the router, and go out for a cigarette. When you return, none of your changes are active and the router boots to the initial configuration mode! Which of the choices below indicates the source of your problem?
A. Hardware failure in NVRAM prevents the router from loading the config
B. Startup-config in flash is corrupt and cannot be analyzed
C. Router configuration-register set to bypass startup configuration
D. Startup-config in NVRAM is corrupt and cannot be analyzed
E. None of the above
10. [单选题]Which one of the following characteristics is true regarding the use of hubs and switches?
A. Hubs can have their ports be configured with VLANs
B. Using hubs is costly with regard to bandwidth availability.
C. Switches can not forward broadcasts.
D. Switches are more efficient than hubs in processing frames.
E. Switches increase the number of collision domains in the network.
