1. [单选题]You want to upgrade the Ezonexam LAN so that all ports operate in full duplex mode. Which statement is true about full-duplex Ethernet when comparing to half-duplex Ethernet?
A. Full-duplex Ethernet consists of a shared cable segment. Half-duplex provides a point-to-point link
B. Full-duplex Ethernet uses two wires to send and receive. Half-duplex Ethernet uses one wire to send and receive
C. Full-duplex Ethernet can provide higher throughput than can half-duplex Ethernet of the same bandwidth
D. Full-duplex Ethernet uses a loopback circuit to detect collisions. Half-duplex Ethernet uses a jam signal
E. None of the above
2. [单选题]关于帧中继的说法，正确的是（）
A. 速率最大为1Mbit/s
B. 不提供差错校验功能
C. 可以偷占带宽
D. 数据传输质量高于DDN
3. [单选题]OSI七层模型中，数据链路层(data link layer)的数据封装名称为（）
A. 比特
B. 帧
C. 包
D. 段
4. [单选题]You wish to segment your LAN into multiple broadcast domains. Which technology method should you implement in order to do this?
A. Transparent bridging
B. Cut-through switching
C. Fragment-free switches
D. Virtual LANs
E. Store-and-forward switching
F. F. None of the above
5. [单选题]When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?
A. when all switches have the same BID as the root switch
B. when all switches have received the MAC address of each neighboring switch
C. when every enabled switch port has been assigned a unique identifier
D. when every operating switch port is in either the blocking or forwarding state
E. when all switches are in either client, server, or transparent mode
6. [单选题]当配置一个CISCO的路由器时，缺省的DR和BDR优先级是（）。
B. 1
C. 16
D. 255
7. [单选题]SMTP工作在OSI哪一层（）
A. 会话层(session layer)
B. 表示层
C. 传输层
D. 应用层
8. [单选题]Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?
A. Rollover cable
B. Console cable
C. Crossover cable
D. Straight-through cable
E. Serial cable
9. [单选题]You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router VE1 locally using a terminal emulation program such as HyperTerminal.
A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's Ethernet port using a straight-through cable.
D. Connect the PC's Ethernet port to the router's Ethernet port using a rollover cable.
E. Connect the PC's Ethernet port to the router's Ethernet port using a straight- through cable.
F. F. None of the above
10. [单选题]帧中继环境中，CIR的含义是（）
A. 提高线路速率
B. 保证线路速率
C. 降低线路速率
D. 配置线路速率
