【导读】
不凡考网发布计算机2022思科认证证书模拟考试系统314相关信息,更多计算机2022思科认证证书模拟考试系统314的相关资讯请访问不凡考网计算机类考试频道。
1. [单选题]某网络中,拟设计10子网,每个子网中放有14台设备,用IP地址段为199.41.10.X,请问符合此种规划的子网掩码是()
A. 255.255.255.0
B. 255.255.240.0
C. 255.255.255.240
D. 255.248.0.0
2. [单选题]如果把路由器的某个端口的IP配置为:192.168.10.64,掩码配置为:255.255.255.248,则该端口()
A. 能和其他设备正常通信
B. 会变成“administratively down”状态
C. 端口被烧毁
D. 出现错误提示,配置命令执行失败
3. [单选题]下列关于路由器和交换机的描述中,错误的是()
A. 路由器可以用来连接internet
B. 二层交换机可以用来实现“异地网络”互连
C. 路由器可以用来做路径选择
D. 交换机可以转发广播
4. [单选题]The IP network 210.106.14.0 is subnetted using a /24 mask. How many usable networks and host addresses can be obtained from this?
A. 1 network with 254 hosts
B. 4 networks with 128 hosts
C. 2 networks with 24 hosts
D. 6 networks with 64 hosts
E. 8 networks with 36 hosts
5. [单选题]对于运行OSPF协议的路由器来说,RouterID是路由器的唯一标识,所以协议规定:必须保证RouterID在如下范围之内唯一()。
A. 网段内
B. 区域内(intra-region)
C. 自治系统内
D. 整个因特网
6. [单选题]You are an administrator of the Ezonexam switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in the Ezonexam network.However, you need to share the VLAN information across numerous switches. Which of the following would allow you accomplish this?
A. STP
B. GVRP
C. SNMP
D. VTP
E. DHCP
F. F. None of the above
7. [单选题]TCP23是()协议端口号(port number);UDP69是()端口号(port number);TCP80是()端口号(port number)。
A. TELNET FTP HTTP
B. FTPT FTP HTTP
C. TELNET TFTP HTTP
D. TELNET DNS HTTP
8. [多选题]The Ezonexam network administrator needs to determine what LAN devices to install on the Ezonexam network. What are two advantages of using Layer 2 Ethernet switches over hubs? (Choose two)
A. Allowing simultaneous frame. transmissions
B. Increasing the size of broadcast domains
C. Increasing the maximum length of UTP cabling between devices
D. Filtering frames based on MAC addresses
E. Decreasing the number of collision domains
9. [单选题]How many usable IP addresses can you get from a conventional Class C address?
A. 128
B. 192
C. 254
D. 256
E. 510
10. [单选题]OSPF的度量值是什么()
A. 跳数
B. 接口开销
C. 矢量距离
D. 链路状态