1. [单选题]How many usable IP addresses can you get from a conventional Class C address?
A. 128
B. 192
C. 254
D. 256
E. 510
2. [单选题]为了连接“帧中继”线路，网络中的路由器需要提供的端口类型为（）
A. FastEthernet
B. Serial
C. BRI
D. Ethernet
3. [单选题]The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?
A. It designates VLAN 998 as the default for all unknown tagged traffic
B. It designates VLAN 998 for untagged traffic
C. It blocks VLAN 998 traffic from passing on the trunk
D. It creates a VLAN 998 interface
E. None of the above
4. [单选题]NAT可以被用于完成多种功能，以下不属于其功能的是：（）
A. 转换内部局部地址
B. 内部全局地址复用
C. TCP负载均衡
D. 内部网络流量控制(network traffic control)
5. [单选题]路由器当前的模式为“端口模式”，要退回到“特权模式”，应该使用的快捷键(shortcut key)为（）
A. ctrl+b
B. ctrl+z
C. ctrl+c
D. ctrl+p
6. [单选题]How can a Ezonexam administrator determine if a router has been configured when it is first powered up?
A. A configured router prompts for a password
B. A configured router goes to the privileged mode prompt
C. An un configured router goes into the setup dialog
D. An un configured router goes to the enable mode prompt
7. [单选题]如果把路由器的某个端口的IP配置为：192.168.10.64，掩码配置为：255.255.255.248，则该端口（）
A. 能和其他设备正常通信
B. 会变成“administratively down”状态
C. 端口被烧毁
D. 出现错误提示，配置命令执行失败
8. [单选题]A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?
A. All defined VLANs are allowed on the trunk by default.
B. Each VLAN, or VLAN range, that is specified with the switchport mode command.
C. Each VLAN, or VLAN range, that is specified with the vtp domain command.
D. Each VLAN, or VLAN range, that is specified with the vlan database command.
E. None of the above
9. [单选题]“InsideGlobal”地址在NAT配置里表示的是什么()
A. 这个概括地址是所有的内部子网地址
B. 一个注册的地址是表示一个内部的主机到外部网络
C. 一个全局唯一，私有的ip地址被分配给一个内网的主机
D. 路由器的MAC地址被用做内部主机去连接这个互联网
10. [单选题]在OSPF的完全存根区域中，使用以下哪种LSAType报文或其它方式与区域间通信：（）
A. LSAType1.2
B. LSAType3
C. LSAType4
D. 默认路由：0.0.0.0
