1. [单选题]An administrator issues the show ip interface s0/0 command and the output displays that interface Serial0/0 is up, line protocol is up.What does "line protocol is up" specifically indicate about the interface?
A. The cable is attached properly.
B. CDP has discovered the connected device.
C. Keepalives are being received on the interface.
D. A carrier detect signal has been received from the connected device.
E. IP is correctly configured on the interface.
2. [单选题]Cisco IOS命令ip nat inside source static 10.1.1.5 172.35.16.5的作用是什么(what is)()
A. 为所有的外部NAT创建一个全局的地址池
B. 为内部的静态地址创建动态的地址池
C. 它为所有内部本地PAT创建创建了动态源地址转换
D. 为内部本地地址和内部全局地址创建一对一(one to one)的映射关系
3. [多选题]下列哪一设备工作时，要用到OSI的七个层（一层到七层）（）
A. PC
B. 网管机
C. WEB服务器
D. 交换机
E. 路由器
4. [单选题]哪个ACL可允许主机10.220.158.10访问web服务器192.168.3.244()
A. access-list 101 permit tcp host 10.220.158.10 eq 80 host 192.168.3.224
B. access-list 101 permit tcp 10.220.158.10 0.0.0.0 host 192.168.3.224 0.0.0.0 eq 80
C. access-list 101 permit host 10.220.158.10 0.0.0.0 host 192.168.3.224 0.0.0.0 eq 80
D. access-list 101 permit tcp 10.220.158.10 0.0.0.0 host 192.168.3.224 eq 80
5. [单选题]“InsideGlobal”地址在NAT配置里表示的是什么(what is)()
A. 这个概括地址是所有的内部子网地址
B. 一个注册的地址是表示一个内部的主机到外部网络
C. 一个全局唯一，私有的ip地址被分配给一个内网的主机
D. 路由器的MAC地址被用做内部主机去连接这个互联网
6. [单选题]You are a senior network administrator at Ezonexam, and while performing the password recovery procedure on your 2500 series Cisco router, you type in the following command:o/r 0x2142
A. What is the purpose of this command?
B. It is used to restart the router.
C. It is used to bypass the configuration in NVRAM.
D. It is used to enter ROM Monitor mode.
E. It is used to view the lost password.
F. It is used to save the changes to the configuration.
7. [单选题]交换机转发数据到目的地依靠()
A. 路由表
B. MAC地址表
C. 访问权限表
D. 静态列表
8. [单选题]对于使用链路状态路由协议的路由器如何选择最佳路线到达子网，下列哪项是正确的（）
A. 路由器会发现链路状态数据库中的最佳路由
B. 通过针对链路状态数据库中的信息运行SPF算法，路由器会计算出最佳路由
C. 路由器将比较每个邻居接收到的更新中为子网列出的标准，并挑选最佳标准路由
D. 路由器会使用具有最低条数的路径
9. [单选题]While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?
A. The data link layer
B. The application layer
C. The access layer
D. The session layer
E. The network layer
10. [单选题]查看路由表的命令是：()
A. show interface
B. show run
C. show ip route
D. show table
