1. [单选题]The Ezonexam LAN is upgrading all devices to operate in full duplex. Which statement is true about full-duplex Ethernet in comparison to half-duplex Ethernet?
A. Full-duplex Ethernet uses two wires to send and receive. Half-duplex Ethernet uses one wire to send and receive
B. Full-duplex Ethernet consists of a shared cable segment. Half-duplex Ethernet provides a point-to-point link
C. Full-duplex Ethernet can provide higher throughout than can half-duplex Ethernet of the same bandwidth
D. Full-duplex Ethernet uses a loopback circuit to detect collisions. Half-duplex ethernet uses a jam signal
E. None of the above
2. [单选题]两个VLAN之间要想通信，应该使用的设备是（）
A. 集线器
B. 二层交换机
C. 路由器
D. PC机
3. [多选题]Which three statements are true about the operation of a full-duplex Ethernet network, which is being used in the Ezonexam LAN? (Choose three)
A. Ethernet hub ports are preconfigured for full-duplex mode.
B. The host network card and the switch port must be capable of operating in full-duplex mode.
C. There are no collisions in full-duplex mode.
D. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
E. A dedicated switch port is required for each full-duplex node.
4. [单选题]路由表中，某条路由的“路由代码为D”，则表明该路由为（）
A. 直连路由
B. 静态路由
C. IGRP路由
D. EIGRP路由
5. [单选题]下面哪个操作可以使访问控制列表真正生效（）。
A. 将访问控制列表应用到接口上
B. 定义扩展访问控制列表
C. 定义多条访问控制列表的组合
D. 用access-list命令配置访问控制列表
6. [单选题]备份路由器IOS的命令是：()
A. copy flash tftp
B. copy running-configt ftp
C. copy IOS tftp
D. copy startup-configt ftp
7. [单选题]哪个命令可以成功测试网络：()
A. Router>ping192.5.5.0
B. Routerping192.5.5.30
C. Router>ping192.5.5.256
D. Routerping192.5.5.255
8. [单选题]IP地址为：192.168.50.70，掩码为：255.255.255.248，则该IP地址所在子网的子网号为（）
A. 192.168.50.32
B. 192.168.80.64
C. 192.168.50.96
D. 192.168.50.71
9. [单选题]The Ezonexam network administrator needs to a switch named VE1 to become the root bridge for a redundant path switched network. What can be done to ensure that VE1 will always assume the role as the root bridge?
A. Assign the switch a higher MAC address than the other switches in the network have
B. Establish a direct link from the switch to all other switches in the network
C. Configure the switch full-duplex operation and configure the other switches for half-duplex operation
D. Configure the switch so that it has lower priority than other switches in the network
E. None of the above
10. [单选题]You wish to segment your LAN into multiple broadcast domains. Which technology method should you implement in order to do this?
A. Transparent bridging
B. Cut-through switching
C. Fragment-free switches
D. Virtual LANs
E. Store-and-forward switching
F. F. None of the above
