1. [单选题]PPP工作在OSI的哪一层（）
A. 物理层
B. 数据链路层(data link layer)
C. 网络层
D. 传输层
2. [单选题]如果网络中的路由器都是cisco路由器，则优先选择哪一个路由协议（）
A. RIP
B. EIGRP
C. IGRP
D. OSPF
3. [单选题]在启用IGRP协议时，所需要的参数是：()
A. 网络掩码
B. 子网号
C. 自治系统号
D. 跳数
4. [单选题]关于OSPF中DR的说法不正确的是（）
A. 通过hello报文选举DR
B. 如果某路由器优先级比DR优先级高，但启动晚，它会抢占原来的DR自己成为DR
C. 一个广播类型网络中只能有一个DR
D. 一旦DR失效，BDR接替DR的工作，并重新选举一个BDR
5. [单选题]OSI七层模型中，“包”是哪一层数据封装的名称（）
A. 物理层
B. 数据链路层(data link layer)
C. 网络层
D. 传输层
6. [单选题]When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?
A. when all switches have the same BID as the root switch
B. when all switches have received the MAC address of each neighboring switch
C. when every enabled switch port has been assigned a unique identifier
D. when every operating switch port is in either the blocking or forwarding state
E. when all switches are in either client, server, or transparent mode
7. [单选题]An administrator issues the show ip interface s0/0 command and the output displays that interface Serial0/0 is up, line protocol is up.What does "line protocol is up" specifically indicate about the interface?
A. The cable is attached properly.
B. CDP has discovered the connected device.
C. Keepalives are being received on the interface.
D. A carrier detect signal has been received from the connected device.
E. IP is correctly configured on the interface.
8. [单选题]查看E0端口配置信息的命令是：()
A. show access-list
B. show ip route
C. show version
D. show interfacee0
9. [单选题]How many usable IP addresses can you get from a conventional Class C address?
A. 128
B. 192
C. 254
D. 256
E. 510
10. [单选题]You have a class C network, and you need to design it for 5 usable subnets with each subnet handling a minimum of 18 hosts each. Which of the following network masks should you use?
A. 225.225.224.0.
B. 225.225.240.0.
C. 225.225.255.0.
D. 255.255.255.224
E. 225.225.255.240
