1. [单选题]You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".
A. You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?
B. Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
C. Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.
D. Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
E. Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
2. [单选题]You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
A. Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
B. You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
C. On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
D. On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
E. Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
F. Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
3. [单选题]You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.
A. What should you do? (Choose all that apply)
B. Convert the system partition to NTFS.
C. Install service pack4 or later on the server.
D. Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
E. Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
4. [单选题]You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.
A. However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
B. You are unable to perform. the upgrade. What should you do to resolve the problem?
C. Convert the system partition to NTFS.
D. Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
E. Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
F. Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
5. [单选题]You are the administrator of your company's network. A user named Paul in the service department has a Windows 2000 Professional computer. Paul needs to access the files that are in a shared folder on his computer. A local group named Sales has permissions to access the data. Paul is a member of the Sales local group but he cannot access the file he needs.What should you do?
A. Grant Paul NTFS permission so that he can access any parent folder to files in the shared folder.
B. Share the Sales folder and grant Paul shared folder permission to access the shared Sales folder.
C. Remove Paul from any other group that has been explicitly denied access to the Sales folder.
D. Delete the Sales local group and recreate it. Add individual user accounts from the Sales department back into Sales local group.
