2022计算机微软认证证书模拟试题166

1. [单选题]You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".

A. You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?
B. Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.
C. Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.
D. Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.
E. Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

2. [单选题]Your Windows 2000 Professional computer contains a single hard disk configured as a single partition.You want to move a folder named Sales under a folder named Corp on your computer.

A. You want the files in the Sales folder to remain compressed after moving the folder. You want the files in the Corp folder to remain uncompressed. You want to ensure that the files are recoverable in case of any disk problems. You also want to move the files with the least amount of administrative effort.
B. What should you do?
C. Copy the Sales folder to the Corp folder. Do nothing further.
D. Backup the Sales folder. Move the Sales folder to the Corp folder.
E. Compress the Corp folder. Then copy the Sales folder to the Corp folder.
F. Move the Sales folder to a second computer. Then move the Sales folder to the Corp folder.

3. [单选题]You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

A. What should you do?
B. Configure the DHCP scope to add additional IP addresses.
C. Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.
D. Modify the startup sequence in the CMOS of the remaining computers.
E. Create computer accounts on the remaining computers in the Active Directory.

4. [单选题]You are the administrator responsible for security and user desktop settings on your network. You need to configure a custom registry entry for all users. You want to add the custom registry entry into a Group Policy object (GPO) with the least amount of administrative effort.What should you do?

A. Configure an ADM template and add the template to the GPO.
B. Configure an INF policy and add the policy to the GPO.
C. Configure a Microsoft Windows installer package and add the package to the GPO.
D. Configure RIS to include the registry entry.

5. [多选题]You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.

A. You want to successfully install Windows 2000 Server on the computer.
B. What should you do? (Each correct answer presents part of the solution. Choose two)
C. Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.
D. Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.
E. Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.
F. Insert a disk with the original SCSI firmware.
G. Insert a disk with the OEM SCSI driver.

6. [单选题]You need to install Windows 2000 Professional on a new computer in your network. You use the setup manager wizard to configure a fully automated installation script. file. You begin an unattended installation and leave the office.When you return, the installation has reached the GUI-mode setup and you see the following error message "Unattended setup is unable to continue because a setup parameter specified by your system administrator or computer manufacturer is missing or invalid."

A. You need to complete the installation. What must you do?
B. In the unattended section of the answer file, set theOemPreinstallproperty to Yes.
C. In the NetBinding section of the answer file, specify theEnablevariable.
D. In the UserData section of the answer file, specify theProductIDvariable
E. In the GUIUnattended section of the answer file set theOemSkipWelcomeproperty to 1.

7. [单选题]Your Windows 2000 Professional computer has 10 shared folders that are available to other network users. A user reports that he cannot access a shared folder named Share

A. You want to respond to the user's problem as quickly as possible by using an administrative tool.
B. What should you do?
C. Use Windows Explorer to display the file paths of your shared folders.
D. Use Storage in Computer Management to view logical drive properties.
E. Use Event Viewer in Computer Management to search for shared folder error messages.
F. Use System Tools in Computer Management to display the file paths of your shared folders.

8. [单选题]Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.

A. What should you do?
B. On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
C. On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
D. Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
E. Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
F. Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.

9. [单选题]You are the administrator of your company's network. An employee named Mark is leaving the company. A new employee named Eric has been hired to replace him.Mark has a local user account on a Windows 2000 Professional computer. Mark has rights to multiple files and folders on the computer.

A. You want Eric to have the same rights and permissions that Mark has. You want to ensure that Mark will no longer have access to the files and folders. You want to accomplish this with least administrative effort.
B. What should you do?
C. Rename Mark's user account to Eric and change the account password.
D. Create Eric's account by copying Mark's profile to Eric's account. Delete Mark's account.
E. Create Eric's account by copying Marks account. Delete Mark's account.
F. Delete Mark's account. Add Eric's account. Add Eric to the same groups to which Mark belonged. Grant Eric to all the individual user rights and permissions that Mark had.

10. [单选题]You are the administrator of a SQL Server 2000 computer. You create several jobs on the server and schedule them to run during the evening.You configure an operator on the server and configure the jobs to send an e-mail to this operator if a job fails for any reason.

A. While testing the jobs, you discover that e-mail messages are not being sent to the operator when a job fails. You use SQL Server Enterprise Manager to confirm that SQL Mail is started.
B. You need to ensure that e-mail messages are sent to the operator whenever a job fails. What should you do?
C. Configure SQLAgentMail to use a valid MAPI profile
D. Configure SQL Mail to use a mailbox that delegates permissions to the operator
E. Use the net send notification method to send the operator e-mail messages
F. Create a job that executes the xp_startmail stored procedure Configure the job to run whenever SQL Server 2000 starts

查看答案&解析 点击获取本科目所有试题

本文链接：https://www.zhukaozhuanjia.com/download/086jqq.html