【名词&注释】
单向阀(check valve)、皮下注射(subcutaneous injection)、无线电台(radio station)、惰性气体(inert gas)、无线电话(radiotelephone)、干电池(dry battery)、离心泵理论(centrifugal pump theory)、无线电报(marconigram)、所有人(owner)、港务监督(harbor superintendency)
[单选题]第一组Older loop scavenged engines may have a single injector mounted centrally in the cylinder head. Because the exhaust valve is in the center of the cylinder head on modern uniflow scavenged engines the fuel valves (2 or 3) are arranged around the periphery of the head. The pressure at which the injector operates can be adjusted by adjusting the loading on the spring. The pressures at which the injectors operate vary depending on the engine, but can be as high as 540 bar. Some injectors have internal cooling passages in them extending into the nozzle through which cooling water is circulated. This is to prevent overheating and burning of the nozzle tip. Injectors on modern engines do not have internal cooling passages. They are cooled by a combination of the intensive bore cooling in the cylinder head being close to the valve pockets and by the fuel which is re-circulated through the injector when the follower is on the base of the cam or when the engine is stopped. As well as cooling the injector, re-circulating the fuel when the engine is stopped keeps the fuel at the correct viscosity for injection by preventing it from cooling down. Fuel injectors must be kept in good condition to maintain optimum efficiency, and to prevent conditions arising which could lead to damage within the cylinder. Injectors should be changed in line with manufacturers&39; recommendations, overhauled and tested. Springs can weaken with repeated operation leading to the injector opening at a lower pressure than designed. The needle valve and seat can wear which together with worn nozzle holes will lead to incorrect atomization and dribbling.
A. Modern uniflow scavenged engines have______.
B. a single injector mounted in the center of the cylinder head
C. several injectors mounted around the external boundary of the cylinder head
D. a single injector mounted at the external boundary of the cylinder head
E. several injectors mounted in the center of the cylinder head
